top of page

InstallationMethod

Tools

Label Biopox น้ำยากันลื่น_Biopox PU6000 (30-11-2023).png

น้ำยาทำความสะอาด

1-03.png

ไม้กวาด

1-02.png

แปลงขัด

1-04.png

ผ้าเช็ดพื้น

Foam Roller

Biopox Anti-slip Clear Coat

Metal Scraper
Gloves
Methodology
1-1.png

01

Wear gloves, goggles, and a face mask.

02

Clean the original surface with a general cleaning solution. (Hydrochloric or Citric) Rinse with clean water and wipe dry.
**See detailed in surface preparation section**

2-1.png
3-1.png

03

Open the can using a metal scraper. Scrape off the clear sand from the bottom of the can (Very important)

04

Mix thoroughly until the clear sand is homogenous with the solution. 

4-1.png
5-1.png

05

Dip foam roller into the can fully submerging the roller on the first time and only half on subsequent times. 

06

Apply the foam roller onto the desired surface ensuring that the clear sand is evenly distributed. 
**Make sure to stir the solution everytime before subsequent dipping** 

6-1.png
7-1.png

07

Drying:

- Dry to touch within 1 hr. 
- Dry and walkable within 6 hrs. 
- Dry and can be exposed to water within 12 hrs. 
- Can be clean using brush after 24 hrs. 

08

Clean and wash the surface with mild cleaning agent (Non-acidic) before first use. 

yellow-rectangle-sponge-with-foam.jpg
bottom of page